I can look back on this DIY and laugh…

now.

At the time it was a total shit show and entirely my fault. I thought I could “build off the cuff” without plans or even a vision of what I wanted.

Don’t do that folks. At least have a vision.

The problem I was trying to solve was that my derriere is too large for the manufacturer’s pool ladder that comes with the Intex pool.

Considerably larger.

Yes, I could have shimmied myself sideways through it and still have been able to swim – but I didn’t want to shimmy. I wanted to get in comfortably.

(I’ll take the blame for determining the “need”, but don’t kid yourself Hubby – your keester isn’t 12″ either.)

I’m only going to show you one build photo of the project in progress because it doesn’t actually match the plans that I created after we were done.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Papa came over to help me because I begged him to, he’s the mastermind of the operation, I wanted his company, and thank heaven for him because I could not wrap my head around the measurements and quantities of wood.

Yup, he was the brains and I was merely the brawn.

I’ve created building plans for you to work from so you aren’t hemming and hawing through each step like we did.

DIY Pool Ladder Supplies

Wood:

Cut List:

(2×4’s)

(1×4’s)

(2×10’s)

I’ll leave the measuring and cutting of the fence boards to you based on the idea that you probably have uneven ground and will need to adjust each board slightly.

First up build your base frame with a tall back.How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

The upper back section will remain open so that you can fit your Intex pool ladder inside the stairs themselves – the steps will only make getting IN to the pool more comfortable, you’ll still need the manufacturer’s metal ladder to get yourself out.

Originally, I had hoped to use the interior of the DIY pool ladder to store my patio cushions – I’m still not convinced there isn’t a way to add a hinge somewhere to make that happen – but for now, you’ll notice that the bottom step is both higher from the ground and much deeper. It’s perfect for a bench – so this was totally intentional.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Next up, you’ll want to attach your stair stringers to the boxed base. 3 1/2″ wood screws drilled in from the back and up from the bottom will give you a nice solid attachment.

Now you’ll want to attach the risers; we used 1 x 4 boards for this because it wasn’t really a structural necessity – just an aesthetic one. You will have a small gap unless you choose to rip boards to fill the 1 1/2″ space. The risers will run from the outside edge of the stringer to the outside edge of the opposite one.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

After all of your risers have been installed, you’ll use your 5.5″ (1×6″) pressure treated fence boards to close in the sides. The boards won’t fit each step exactly, so you’ll need a small jig saw to notch out overlapping areas.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Once both sides have been covered, you can add the steps. We used 2×10 boards for strength. Your bottom step (aka. the bench) will have a small overhang past the front facing.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

If I were smarter I would have moved the risers up so that they met with the upper step and so that the gap was hidden behind the lower step, but in the grand scheme of things it’s a minor aesthetic thing that can be fixed if it bugs me enough.

You may notice that some of the steps aren’t completely straight (my Dad notices these minute details), it’s because we built the stairs where they were going to be kept. I suggest you do this because building a completely straight ladder/staircase that is going to be placed on uneven ground is a recipe for rocking and shaking. Adjust your boards to fit the environment, checking for level on the steps themselves, and you’ll find your ladder won’t shift around when you use it.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Because the DIY pool ladder steps and frame were made from building lumber, it was important to add an exterior stain to the stairs. It will protect the wood from water, rot, mildew and prolong the life of your stairs. Believe it or not, Arborcoat exterior stain actually makes the surface less slippery as well.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

If only you could see the myriad of errors hiding inside this beauty!

Don’t worry though, I believe my building plans to be pretty accurate – based on a 52″ tall Intex swimming pool.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

I attached my pool goggle storage bin to the side with a Command hook and prettied it up a bit with some flowers.

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Look at that! I can get my caboose into the pool sans shimmy and I can use the bench portion to eat popsicles with the kids and expand it further. lol

How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

As a closing note, I did purchase some 3M Anti Slip tape from Amazon and ran a strip along each step just to be safe. With all the climbing in and out, the stairs do get pretty wet and I didn’t want to risk a fall. This tape is useful for so many different kinds of DIY projects. I get through so much of it that I’d love to set up a regular delivery of it from a 3m supplier, but they only deal with companies. At least I have Amazon to fall back on.

For your Pinterest board:
How to build above ground pool stairs, Intex pool stairs, DIY pool ladder, DIY pool stairs, pool ladder, pool stairs, building plans for pool stairs

Thank you so much Papa for all of your hard work – this might have ended up a catapult without your analytical/commonsensical presence.

Have a great one!

 

Linked to:

 

SaveSave

SaveSave

SaveSave

9 Responses

  1. Hi —- This is a great idea and both of you did a super job – to be commended, no matter who was in charge!

    I wonder if it would be easy to put in some sort of railing to be able to hang onto if needed? We had an above ground pool years ago and put in marine rope with wood stanchions – much easier to have some sort of railing to help get up and down safely.

    Love this blog! Have a great rest of summer.

    1. It is a bit high, but I wanted the first ‘step’ to be used as bench seating as well – where the kids can sit and dry off with a towel and a popsicle. My girls were 9 and 11 when I built this and they had no problems climbing up and down to jump in and out of the pool (over and over and over).

  2. This is so ubber fantastic I cannot tell you just how much you have helped me and what a great job you did! Bravo Zulu to you for your post, it is so professional!

  3. Love the idea but It just looks weird having that ginormous first step … It just doesn’t make sense to me. Why not add one more step??? They could still sit on it.

    1. You’re totally right, but I had a limited amount of space to work with – the ladder (as it is) butts up against my patio and I didn’t want it to take up anymore square footage. Think of it as a few extra calories burned off on that first step and no ants crawling in your pants if you are sitting on the bench. lol

  4. Your directions are incorrect. I follwoed them to a T and the stringers do NOT match up. You did not put in a size for each riser but when I purchased basic stringers- after having the basic framework completed the 4 step stringer does NOT come to the top of the back 2 x 4’s….how high is each of your risers as you did not put this information in the directions?